Electrolux EUN1100FOW User Manual page 12

12 www.electrolux.com
Problem
Power indicator light is
flashing.
The compressor operates
continually.
There is too much frost
and ice.
The compressor does not
start immediately after
pressing the "FastFreeze",
or after changing the tem‐
perature.
Possible cause
The temperature in the ap‐
pliance is too high.
An error has occurred in
measuring the tempera‐
ture.
The appliance is not work‐
ing properly.
The temperature in the ap‐
pliance is too high.
Temperature is set incor‐
rectly.
Many food products to be
frozen were put in at the
same time.
The room temperature is
too high.
Food products placed in
the appliance were too
warm.
The door is not closed cor‐
rectly.
The FastFreeze function is
switched on.
The door is not closed cor‐
rectly or the gasket is de‐
formed/dirty.
The water drainage plug is
not correctly positioned.
Food products are not
wrapped properly.
Temperature is set incor‐
rectly.
This is normal, no error
has occurred.
Solution
Refer to "Door Open
Alarm"or "High Tempera‐
ture Alarm".
Contact a qualified electri‐
cian or contact the nearest
Authorized Service Centre.
Contact a qualified electri‐
cian or contact the nearest
Authorized Service Centre.
Contact a qualified electri‐
cian or contact the nearest
Authorized Service Centre.
Refer to "Operation" chap‐
ter.
Wait a few hours and then
check the temperature
again.
Refer to climate class chart
on the rating plate.
Allow food products to cool
to room temperature be‐
fore storing.
Refer to "Closing the door".
Refer to "FastFreeze func‐
tion".
Refer to "Closing the door".
Position the water drain‐
age plug in the correct
way.
Wrap the food products
better.
Refer to "Operation" chap‐
ter.
The compressor starts af‐
ter a period of time.