Page 1
Shredder User Manual 1-800-327-8508 USA Only 1-310-793-5650 International Email: info@auroracorp.com For more information, please visit us at: AU830MA www.auroracorp.com Model No. Please read these operating instructions before using the unit.
Page 2
WARNING : SAFETY INSTRUCTIONS, READ BEFORE USING! Do not spray or keep any aerosol products in or around the Read instructions before use. shredder. Avoid touching the document Keep loose clothing or jewelry feed opening with hands. away from the paper entry slot. Product is not intended for use by Avoid getting hair near the children (product is not a toy).
Paper Shredder 8 Sheets of 20 lb. bond paper* Sheet Capacity Operating Instructions Installation 3/32 in. x 15/32 in. pieces Paper Shred Size 2 mm x 12 mm pieces Operation Paper Entry Width Maintenance 8.7 in / 220 mm Troubleshooting Credit Card Capacity 1 at a time Service Center Duty Cycle...
Page 4
INSTALLATION Attach 4 caster wheels to the bottom of the shredder body. PUSH PUSH DOWN DOWN CORRECT FIT Gently place the shredder head onto Make sure the shredder head is the shredder body. correctly mounted. ENGLISH...
OPERATION Control Switch FIGURE 2 Using the switch located on the unit, select one of the following settings by sliding the switch either left or right. (FIGURE 2) Auto / On: This setting allows the shredder to be automatically started by inserting paper into the feed slot.
Page 6
OPERATION Paper / Credit Card: Make sure you do not exceed sheet Insert one credit card at a time into the middle of the feed slot. count per pass (8 sheets max). Insert paper as straight as pos- sible into feed slot and release. NOTE: ...
OPERATION • Door Open: The Red LED light indicates the shredder basket is not pushed in properly. Shredders with pull-out wastebaskets feature a safety power cut off upon bin removal. Make sure the pull-out wastebasket is properly set back into place and the green “Power On” indicator is lit. • Bin Full: When the "Basket is Full", the RED light will indicate it needs to be emptied.
TROUBLESHOOTING If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you con- tinue to have problems, contact customer support at our Service Center 1-800-327-8508. DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the product warranty.
If you have any questions in regards to the operation of this shredder or in need of a spare part, please contact our service center at: Aurora Corp. of America Telephone: 1-800-327-8508 (U.S.A. only) or 1-310-793-5650 (International) Business hours: Monday to Friday 8:00 am - 5:00 pm PST (Pacific Standard Time) Email: info@auroracorp.com...
Should there be a defect or malfunction of this product, Aurora will repair or replace the product free of charge. Customer is responsible for all shipping charges to return the defective product to Aurora. A copy of the proof of purchase showing original purchase date is required.
Need help?
Do you have a question about the AU830MA and is the answer not in the manual?
Questions and answers