Asus STRIX Z270H GAMING Bios Manual page 29

The following item appears only when the CPU VRM Switching Frequency is set to [Auto].
VRM Spread Spectrum
This item allows to enhance the system stability.
Configuration options: [Auto] [Disabled] [Enabled]
CPU Power Duty Control
DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal
conditions of every phase component.
[T. Probe]
[Extreme]
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Power Phase Control
This item allows you to set the power phase control of the CPU.
[Auto]
[Standard]
[Optimized]
[Extreme]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
CPU Graphics Load-line Calibration
The load-line is defined by the Intel VRM specification and affects the CPU Graphics
power voltage. The CPU Graphics working voltage will decrease proportionally
depending on the CPU Graphics loading.
Configuration options: [Auto] [Level 1] - [Level 7]
The boosted performance may vary depending on the CPU Graphics specification. DO
NOT remove the thermal module.
CPU Graphics Current Capability
This item adjusts the total power range for CPU Graphics overclocking. A higher value
setting provides higher power consumption delivery and extends the overclocking
frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Configure higher values when overclocking or under a high CPU Graphics loading for extra
power support.
ROG STRIX Z270H GAMING BIOS Manual
Select to set the VRM thermal balance mode.
Select to set the VRM current balance mode.
Automatically set the phase control mode.
The phase control will be based on the CPU command.
Set to the ASUS optimized phase tuning profile.
Set to the full phase mode.
29