Putting The Computer To Sleep Or Shutting It Down - Lenovo G51 User Manual

Putting the computer to sleep or shutting it
down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
When you have finished working with your computer, you can put it to sleep
or shut it down.
Putting your computer to sleep

If you will be away from your computer for only a short time, put the
computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use,
bypassing the startup process.
To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the Power button.
• Open the charms, and then select Settings
Note: Wait until the power indicator light starts blinking (indicating that the computer is
in sleep mode) before you move your computer. Moving your computer while the
hard disk is spinning can damage the hard disk, causing loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard.
Note: If the computer does not awaken after pressing a key on the keyboard, this means
that the computer has entered an enhanced power-saving mode.
• Press the Power button.
 Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down the computer, do one of the following:
• Open the charms, and then select Settings
• Press and hold or right-click the Start button in the lower-left corner and
select Shut down or sign out  Shut down.
• Select
Note: The operation depends on the BIOS setup. Please refer to the actual product.
 Shut down in the upper-right corner of the Start screen.
Chapter 2. Starting to use Windows 8.1
 Power
 Power
19
 Sleep.
 Shut down.