Download Print this page

Sealey HT02LED Manual page 2

2w & 1.5w smd led rechargeable clip light with auto sensor

Advertisement

4.1.
WORK MODES:
4.1.1.
LED Floodlight Low Press on/off switch once and the low floodlight will illuminate.
4.1.2.
LED Floodlight High Press a second time and the high floodlight will illuminate
4.1.3.
LED Floodlight Red Press a third time and the Red light will illuminate.
4.1.4.
LED Spotlight Press a forth time and the spotlight will Illuminate.
4.1.5.
One further press will turn the light off.
4.1.6.
Sensor mode, press the sensor switch, wave the hand at the sensor reception to enter the sensor mode.
Green light will flash near charging point to show it is operational. This will operate in any work mode listed above.
4.2.
RECHARGING
4.2.1.
Designed with USB Type C input, supplied with a USB cable which allows for quick and convenient charging.
4.2.2.
Red indicator strobes when charging green indicator stays on after fully charged.
5.
MAINTENANCE
5.1.
Keep the torch clean by wiping with a damp cloth.
5.2.
Store torch in a dry childproof area.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
HT02LED Issue 4 (4)
12/05/23

Advertisement

loading