Philips E Line 288E2E/27 User Manual page 9

2. Setting up the monitor
288E2UAE
1
2
USB hub
1
USB A-B
Kensington anti-theft lock
AC/DC power input
HDMI input
DisplayPort input
Audio output
6
USB upstream
7
USB fast charger/USB downstream
USB downstream
8
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
2 3 4 5 6 7 8
Fast Charger
2
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
USB hub
4
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Standby
and Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in "ON" state, please go to OSD Menu,
then select "USB standby mode", and
switch it to "ON" state. Somehow if
your monitor reset to factory setting,
ensure to select "USB standby mode"
to "ON" state in OSD menu.
USB charging
5
This display has USB ports capable of
standard power output including some
with USB Charging function (identifiable
with power icon
ports to charge your Smart phone or
power your external HDD, for example.
The display must be powered ON at all
times to be able to use this function.
Some select Philips displays may not
Power or Charge your device when it
enters to "Sleep/Standby" mode (White
power LED blinking). In that case,
please enter to OSD Menu and select
"USB Standby Mode", then, turn the
function to "ON" mode (default=OFF).
This will then keep the USB power and
charging functions active even when the
monitor is in sleep/standby mode.
7
). You can use these