2. Safety standards and warnings
INDICATE
Skills required for installation and maintenance personnel:
•
Certified qualification in the field of installation and maintenance of electrical power systems
and knowledge of the risks deriving from potentially hazardous operations (such as working
on live electrical systems).
•
Knowledge of how battery chargers work and how to install them.
•
Knowledge and skills in wiring power lines.
•
Knowledge of safety standards regarding electrical risk, as well as the ability to read and
understand this manual.
NOTICE
•
The product is a battery charger for electric vehicles that can be used indoors and outdoors.
•
Comply with the local regulations in force for the installation and use of this product..
•
In any situation, the use of the product must comply with the indications established by this
manual.
•
The conservation of the product described must comply with the following requirement:
- until the product is installed, it must be kept together with its accessory components in a
closed, dry and well-ventilated place to avoid exposure to atmospheric phenomena such as
rain, etc.
•
The product is developed, manufactured and tested according to high safety standards.
Therefore, if the instructions and suggestions regarding safety are respected, the product will
not cause damage to private property or to the safety of people under normal circumstances.
•
The instructions contained in this manual must be strictly followed to avoid potential risks for
health or for the functioning of the safety devices. In addition to the indications given in the
manual, always pay attention to the safety and accident prevention regulations in force at the
time of installation and use.
. 7 .