Eastern Times Technology Traveler 6000X User Manual

Traveler 6000,Traveler 6000X User Manual English

Hardware Installation

Note: Supports Windows 7/Vista/XP
1. You can connect the receiver to a USB port of a PC.
2. Install one AAA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the
mouse.

Factory Settings

Left Button: Provides traditional mouse functions like click, double click
1.
and drag.
Magic-Roller: Press the "Magic-Roller" to surf the Internet and Windows
2.
documents.
Right Button: Provides traditional mouse click functions.
3.

Warning: (Troubleshooting)

Do not use the wireless optical/laser mouse on a desk which is made of
1.
glass or mirror.
The connection of the wireless device is factory preset, so when you plug
2.
the USB receiver into any USB port, the connection between the micro
receiver and the mouse will be established automatically.
In case your PC did not install the hardware successfully, remove the micro
3.
receiver from the USB port and go Human Interface Devices under
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.
If you feel the mouse does not move smooth as usual, it is possible the
4.
batteries have lost their charge so you need to replace them. Remember to
put the batteries in the correct direction.
1