Advertisement
NOTE: Use some thread lock on the threaded insert.
4.3.5. Re-insert the calliper pins and tighten using the Hex key, this will seat the insert fully home.
4.3.6. Remove the pins and reassemble the brakes, refer to a proprietary manual for correct procedure.
4.4.
Both Threads Stripped.
4.4.1. When both threads are damaged use the stepped drill bit to centre on the first hole.
4.4.2. Follow from 4.3.4 inserting a threaded insert.
4.4.3. Then follow from section 4.3.2 for the second hole.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
VS0462.V2
Issue 2 (H,F)
REGISTER YOUR
PURCHASE HERE
13/10/23
Advertisement
