Advertisement
Assembly
Assembling the Tinsel Ghost Tree
Step 1. Insert the rods of one half of Top of Tree (A), Upper Section of Tree (B) and Lower Section
of Tree {C} into the matching holes on the other half and fasten together with the Plastic Ties
(G). (FIG.1)
Step 2. Insert the rods on the bottom of the Upper Section of Tree (B) into the holes on the top of
the Lower Section of Tree then insert the Top of Tree onto the Upper Section of Tree and
fasten with Plastic Ties.(FIG.1)
Step 3. Insert the rods of each Arm/Hand (D.E) into the Upper Section of Tree (B). (FIG.2)
Step 4. Insert Ground Stakes (F) into the ground around the base of the Tinsel Ghost Tree. (FIG.2)
FIG.1
FIG.2
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source. Do
not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 61.2 Watts
(0.51Amps). Do not overload. Do not connect to another lighting string, decorative outfit
or other product. Before you use or re-use this product inspect it carefully. Return the
product to place of purchase with receipt if the product has cuts, damage, frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
Advertisement
