Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Howard ROTAVATOR 200
Summary of Contents for Howard ROTAVATOR 200
- Page 1 ROTAVATOR 200 Operating Instructions...
-
Page 2: Table Of Contents
Operational advice ..........20 Introduction Howard would like to thank you for purchasing this Rotavator and offer their support and assistance throughout its productive life. This Rotavator has been designed and manufactured as a tractor driven, ground cultivator - no other use is intended. -
Page 3: Safety Precautions
If you have questions not answered in this manual please retailing, commissioning, operation and maintenance. Howard have designed and manufactured this Rotavator contact your dealer or distributor. with as many safety features as possible. The retailer’s... - Page 4 Rotavator 200 AT ALL TIMES • Ensure the work area is clear, especially of children or animals. • Use the Rotavator only for the purpose for which it has • Inspect the work area for hidden obstructions which may been designed, and in accordance with the instructions constitute a hazard.
- Page 5 Rotavator 200 FOLLOWING OPERATION to the required setting or, if too strong, may induce failures in other components. • Visually inspect the Rotavator and check: • Follow safe workshop practices during any maintenance: - All bolts are tight. - Keep working area clean, dry and in particular free of - That no components are excessively worn, cracked, oil spills.
- Page 6 Rotavator 200 - Do not allow passengers to ride on the tractor unless a MACHINE SUITABILITY TO APPLICATION specific seat is provided. Rotavators have been designed and manufactured as a tractor driven, ground cultivator - no other use is intended.
- Page 7 PTO DRIVE SHAFT GUARDS Always follow the fitting, lubrication and maintenance HOWARD PRODUCTS are supplied with non-rotating PTO instructions supplied by the makers of the PTO Drive Shaft Drive Shaft which must be correctly fifted and well Guard.
-
Page 8: Description
Rotavator 200 ROTAVATOR 200. Model Working Transport Speed Weight Number Tractor engine width cm width cm rotor rpm of blades R200B-085 12-20 R200B-105 14-20 R200B-125 16-25 DESCRIPTION NEW MACHINE Fig. 1 indicates assemblies refered to in the PTO shaft text of this manual which are named bellow:... -
Page 9: Attaching Rotavator To The Tractor
ROTOR AND BLADES when connected to the tractor. This establishes the safe R200 Rotavators are fitted with original HOWARD BLADES working length of PTO drive shaft for connection to the trac- model 9941/42. See fig. 8 where the left blade is marked tor. -
Page 10: Lubrication + Maintenance
Rotavator 200 LUBRICATION + MAINTENANCE ATTENTION! IN ORDER TO OBTAIN A CORRECT MAINTENANCE AND FUNCTION OF YOUR MACHINE IS IMPERATIVE TO FOLLOW THE ENCLOSED INSTRUCTIONS: • (D) DAILY: Intermediate grades of tilth from coarse to fine can be 1. Lubricate with grease gun PTO spiders. -
Page 11: Operational Advice
Rotavator 200 Operational advice Insufficient Depth Obtained adjust depth control equipement insufficient power : use lower tractor gear, reduce rotor speed chaincase on hard soil. Further passes required blades “trowelling” (rolling over ground), increase rotor speed or use lower tractor...