Sharp HN-VA401SU Operation Manual page 11

2
Make sure that the PLC indicator on each adapter lights steady green. This
indicates that the adapter is able to communicate.
• To be able to communicate, the adapter must be registered. The two
adapters in the HN-VA401SU kit have been registered at the factory. If
you are adding a separately purchased adapter, see page
the adapter.
3
For each device (router, computer, network TV, etc.) that you wish to
connect to your home network, insert one end of a LAN cable into the LAN
port on the device and insert the other end into a LAN port on one of the
adapters. Firmly insert the cable ends until they "click" into place.
• Two LAN cables are provided in the kit. If you need additional cables,
please purchase 10BaseT-100BaseTX straight-through (regular) cables.
Router
Computer, network TV, etc.
L A N
L A N
1 L
A N 2
L A N
3 L
A N 4
Installation
11 to register
9