Summary of Contents for baby joy BC10089
- Page 1 USER’S MANUAL Baby Swing BC10089 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
-
Page 2: Before You Start
Before You Start Please read all instructions carefully and keep it for future reference. General Warnings: Attention: To prevent possible injury by entanglement, remove this toy when the child starts trying to get up on its hands and knees in a crawling position. Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard. - Page 3 Standard Configuration Parts A. seat cover B. backrest tube C. seat support tube D. fabric fixed steel wire E. cross tube F. left support tube group G. right support tube group H. front leg I. rear leg J. hanging tubes K.
- Page 4 ASSEMBLY 1. Insert the seat support tube into the backrest tube and “click” into place. click 2. Put on the seat cover to the seat frame. click 3. Insert the steel wire through fabric sewing housing, put the two ends of the steel wire into the plastic holes and “click”...
- Page 5 5. Fix the backrest fabric onto the steel wire with the buttons. click 6. Unfasten the screw. (Attention: do not take off the screw caps). Insert the leg into music device and fasten the screws. Same as the other side. Attention: the folding buttons on legs should be outward always.
- Page 6 click 9. Install the hanging tubes: Insert the 2 hanging tubes into the plastic part holes until you hear “click” sound. 10. Install the cross tube: Install the cross tubes onto the 2 hanging tubes and “click” into place. 11. Install the seat unit: Install the seat unit by inserting the 2 hanging tubes into the seat socket.
- Page 7 12. Assemble the toy bar: put on the 3 toy bar arms onto the toy bar, and then put on the 3 plush toys into the holes of the arms. 13. Insert the toy bar frame into the toy bar hole according to the guide line, and then you can turn around the toy bar by 360 degree, you can stop in different position.
- Page 8 FUNCTIONS 1. Adjust the backrest positions: there are 3 positions of backrest position, adjust it by pulling handle of the backrest. 2. Adjust the positions of toy bar: The toy bar can be hand moved to different positions as you like, easy for parents to amuse baby.
- Page 9 4. Folding: Folding the swing by pressing the 2 buttons on the 2 sides of the swing frame.
- Page 10 SWING CONTROL PLATE INSTRUCTIONS SPEED LIGHT SPEED BUTTON(5 SPEED, PRESS THE BUTTON TO MOVE TO NEXT SPEED) TIMING LIGHT TIMER BUTTON(3 TIMER, 15 MINUTES, 30 MINUTES, 60 MINUTES, PRESS BUTTON TO MOVE TO NEXT TIMER FUNCTION) NATURE SONGS BUTTON(5 NATURE MUSIC BUTTON(12 MELODIES, PRESS SONGS, PRESS THE BUTTON TO THE BUTTON TO MOVE TO NEXT ONE)
-
Page 11: Fall Hazard
WARNING Read this instruction carefully before using and keep it for future reference. Failure to follow these warnings and the assembly instruction could result in serious injury or death. Products need to be installed by adult and used under adult’s supervision. 1. - Page 12 CAUTION To prevent battery leaks, which can burn skin and eyes: • Always replace the entire set of batteries at one time. • Never mix old and new batteries, or batteries of different brands or types. • Remove batteries when storing product for a long time. •...
-
Page 13: Maintenance
MAINTENANCE This product requires regular maintenance to keep it in good working order. Regularly check all parts of the product to ensure that they are operating correctly and for signs of wear or damage. Only replacement parts supplied or recommended by the manufacturer should be used. CLEANING Refer to care label on the product for cleaning instructions for fabrics. - Page 14 Please give us a chance to make it right and do better ! Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP ! US office: Fontana UK office: Ipswich AU office: Truganina Contact Us ! Do NOT return this item.