Dispenser Settings - TabTimer Careousel MK3/11 Instructions Manual

The dispenser is set using 3 buttons:
Button 1 is used for moving to the next function.
Buttons 2 and 3 are used to change the settings in each function.
There are two setting menus:
MENU A:- Button 1: DOSES ALARM CLOCK
MENU B:- Button 3: BEFORE AFTER SOUND LIGHT HOURS DLS
NB: 1. It important that the DATE is set to allow DLS and START functions to operate.
2. After completion of settings in either Menu A or B press button 1 for three seconds
to restore to normal operation. If nothing is done the display will automatically
return to normal after 30 seconds.
Menu A (accessed through Button 1)
Set CLOCK:
1. Press Button 1 repeatedly until 'CLOCK' is visible on the display.
2. Set the correct time by using Buttons 2 and 3. You can fast forward or reverse the time by
pressing and holding down these buttons.
Set DOSES per day:
1. Press Button 1 repeatedly until 'DOSES' is visible on the display.
2. Wait a few seconds. Adjust to the correct number of doses per day using Buttons 2 and 3.
Set ALARM times:
1. Press Button 1 repeatedly until 'ALARM' is visible on the display.
2. Set the 1st (1) alarm time using buttons 2 and 3.
3. Press Button 1 again for the 2nd (2) alarm time and repeat the procedure for all
subsequent alarm times required.
Press and hold down button 1 for a few seconds to exit the menu and revert to normal
operation.

DISPENSER SETTINGS

DATE START RECORD TEST
5