1090 Keyboard Bezel - Lenovo B570 Hardware Maintenance Manual

Lift the keyboard a little
When installing: Make sure that the FPC connector is attached firmly.

1090 Keyboard bezel

For access, remove these FRUs in order:
• "1010 Battery pack" on page 46
• "1030 Hard disk drive (HDD)/memory module/mini PCI Express Card slot compartment cover" on page 47
• "1050 Optical drive" on page 49
• "1080 Keyboard" on page 53
Removal steps of keyboard bezel
1
Remove the screws and
Step Screw (quantity)
1
M2.5 × 8 mm, flat-head, nylon-coated (10)
2
M2 × 2.5 mm, flat-head, nylon-coated (3)
54
Hardware Maintenance Manual
3 , and then detach the connector in the direction shown by the arrows
2
on the bottom.
Color Torque
Black 2.5 kgfcm
White 1.5 kgfcm
4 and 5 .