Related Manuals for CDN NIKA-S3MCL2030L
Summary of Contents for CDN NIKA-S3MCL2030L
- Page 1 PRODUCT SERIES INFORMATION S3MCL2030(L/R） S3MCL2430(L/R） S3MCL3030 S3MCL3630 S4MCL2030(L/R） S4MCL2430(L/R） S4MCL3030 S4MCL3630 Style and shape may vary from the picture above. Instructional purpose only...
-
Page 2: Grounding Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed,Requires two(2) person in installation. READ AND FOLLOW ALL INSTRUCTIONS DANGER BEFORE USING THIS MIRROR CABINET WARNING To reduce the risk of burns, fire, electric shock or injury to persons. - Page 3 Grounded outlet Grounded outlet box Grounded pin...
-
Page 4: Tools Required For Assembly
TOOLS REQUIRED FOR ASSEMBLY Phillips Tape Measure Electrical Drill 1/8” Drill Bit Pencil Level Screwdriver PARTS INCLUDED BOTTOM TOP MOUNTING SHELF SUPPORT GLASS SHELF GLASS SIDE GLASS SIDE WIRE SCREW WALL MOUNTING PANEL SCREW (x6~x8) BRACKET BRACKET (x3) PANEL CONNECTOR PLUG (x3) BRACKET... -
Page 5: Prior To Mounting
PRIOR TO MOUNTING Remove the Door(s) prior to mounting your cabinet(s) Carefully remove side mirror panels for Remove door(s) prior to mounting your recess mount installation. cabinet.Start with unplugging the door from the cabinet. While supporting the door release(the Take off the door(s) carefully and lay it down on a safe area. - Page 6 RECESS INSTALLATION Refer to "dimensions" on page 4 to measure Draw the perimeter of the cabinet on the wall. Rough in size. 3” minimum NOTE:To recess mount, the wall cavity must be framed and the cabinet secured to framing studs. Reroute electrical or water supply lines from the cavity.
- Page 7 RECESS INSTALLATION Position cabinet in cut out opening. First cut off the power plug , then use the WIRE CONNECTOR connect to external power supply. WARNING:Turn off the power before wire connection! Live / Black Neutral / White Ground / Green *Junction box is not included* Neutral to white Live to black...
-
Page 8: Surface-Mounted Installation
SURFACE-MOUNTED INSTALLATION Mark the position of the Bottom Mounting Level and mark the cabinet's location on the wall. Bracket and Punch. 3” minimum Bottom mounting brackets must be attached to furring strip/channel or wall studs Punch holes in the mark, put in Wall Plug, fix With assistance, to rest the cabinet on the Bottom Mounting Bracket to the wall with Screw. - Page 9 SURFACE-MOUNTED INSTALLATION Make sure top brackets are locked in the Insert top mounting bracket into the top of grooves. the cabinet. Adjust the position of Top Mounting Bracket Remove the cabinet, drill holes according and mark the holes with a pencil to the marked position, and put in Wall Plugs.
- Page 10 SURFACE-MOUNTED INSTALLATION Test the fit of the cabinet before Final assembly. Put the cabinet on the bottom mounting bracket and hold the place, then insert the top mounting bracket into the top of cabinet, fix the top mounting brackets to the holes with screw.(repeat step 4-6 ) NOTE: Vibrations occur in the electric drill, use Philips Screwdriver to protect your cabinet top surface.
-
Page 11: Glass Shelf Installation
GLASS SHELF INSTALLATION Insert clear snap in shelf clips into Insert the Glass Shelf along the holes on the sides of the cabinet. board clip slot MIRROR DOOR INSTALLATION 1. Slide the doors into place by Press the end of the hinge to match Installing wiring terminals pinching the end of the hinges. - Page 12 TOUCH BUTTON AND OUTLET CHARGER...
-
Page 13: Use And Maintenance
USE AND MAINTENANCE 1. To avoid damage, do NOT knock the mirror cabinet with any hard objects; CLEANING 2. Do NOT clean the mirror cabinet with caustic cleaner. Do NOT wipe the mirror cabinet with Bristle brush; MAINTENANCE 3. For daily maintenance, please use soft cloth and mild cleaner to clean the mirror cabinet. -
Page 14: Limited Warranty
LIMITED WARRANTY WELLFOR warrants to the original purchaser that, it will, at its election repair,re- place, or make appropriate adjustment to products made by this company shown to have significant defects in material or workmanship which are reported to WELLFOR in writing within two (2)years from the date of delivery.WELLFOR is not responsible for installation costs.
Need help?
Do you have a question about the NIKA-S3MCL2030L and is the answer not in the manual?
Questions and answers