IdeaPad S10-3c Hardware Maintenance Manual
Figure 10. Removal steps of system board (continued)
Lift the system board in the direction shown by arrow
assembly connector
When installing: When attaching the system board to the base cover, adjust
the placement of the wireless radio switch as shown in
both of the audio jack and the microphone jack are attached to the holes on the
base cover as shown in
might cause a damage.
54
, and then Remove the system board.
3
2
a
a
. Improper placement of the switch or those jacks
a
, unplug the power
2
3
b
, and make sure that
b