Operating The Ignition Switch; Starting And Shutting Off The Engine - Toro Z Master Commercial 3000 Operator's Manual

Operating the Ignition
Switch
1. Turn the ignition key to the S
(Figure 21).
Note:
When the engines starts, release the key.
Important:
Do not engage starter for more
than 5 seconds at a time. If the engine fails
to start allow a 15 second cool-down period
between attempts. Failure to follow these
instructions can burn out the starter motor.
Note:
You may need multiple attempts to start
the engine when you start it the first time after
the fuel system has been without fuel completely.
Figure 21
2. Turn the ignition key to shut off the engine.
Starting and Shutting Off
the Engine
Starting the Engine
Important:
Do not engage starter for more than 5
seconds at a time. If the engine fails to start, wait
15 seconds between attempts. Failure to follow
these instructions can burn out the starter motor.
Note:
You may need multiple attempts to start the
engine the first time after adding fuel to an empty fuel
system.
position
TART
g008947
Shutting Off the Engine
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the ignition key and engage
the parking brake when leaving the machine
unattended, even if just for a few minutes.
23
Figure 22
CAUTION
g032328