GreenWorks GPW 1702 Operator's Manual page 12

ASSEMBLY
ASSEMBLING THE GUN HOLdER
(See Figure 3.)
■ Insert the gun holder into the slot until it locks into its tabs.
Fig. 3
ASSEMBLING THE PRESSURE WASHER GUN
■ Insert the male end (A) of the wand into the female bayonet outlet (B) firmly.
(See Figure 4-1.)
■ While pushing in the wand firmly, turn clockwise until tabs lock into place to ensure a leak-free
connection.
(See Figure 4-2.)
A
B
Fig. 4-1
Fig. 4-2
EN - 12