Lenovo IdeaPad S10-3t User Manual page 71

The computer does not
start from the desired
device.
The connected external
device does not work.
The cursor cannot be
accurately positioned by the
fingertip in the tablet mode.
Note: For more details, refer to the Windows Help and Support file.
• See the Boot menu of BIOS Setup Utility. Make sure
that Boot Order in BIOS Setup Utility is set so that
the computer starts from the device you want.
• Also make sure that the device from which the
computer starts is enabled. In the Boot menu in
BIOS Setup Utility, make sure that the device is
included in the Boot Order list.
• Press Fn + F11 when the Lenovo logo appears on the
screen while the computer is starting up to select the
device you want the computer starts from.
Do not connect or disconnect any external device
•
cables other than USB while the computer power is
on; otherwise, you might damage your computer.
• When using a high power consumption external
devices such as an external USB optical disk drive,
use external device power adapter. Otherwise, the
device may not be recognized, or system shut down
may result.
• Calibration is required through the configuration of
the Control Panel.
Chapter 5. Troubleshooting
57