Table of Contents
Advertisement
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
Hinge
(Damper)
(FRICTION DAMPER)
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
HOW TO ASSEMBLE THE MOTOR
① Remove the hinges (Damper) at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
34
Advertisement
Table of Contents
Troubleshooting
