OEM 24801 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product.
Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with
instructions could result in personal injury and/or damage to product or property. Please retain instructions for
future reference.
Unpacking
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. Shipping damage claim
must be filed with carrier.
Specifications and Dimensions
Maximum Capacity
Model Gallons
24801 20 (75L)
SAFETY RULES
1. Know your tool. Read this manual carefully. Learn
the tool's applications and limitations, as well as,
potential hazards specific to it.
2. Ground all tools. If the tool is equipped with three-
pin plug, it should be plugged into a three-pin
electrical socket. Never remove the ground pin.
Failure to properly ground unit could result in severe
electrical shock and / or death.
3. Do not abuse cord. Never use the cord to carry tools
or pull the plug from an outlet. Keep cord away from
heat, sharp edges or moving parts. Replace dam-
aged cords immediately. Damaged cords increase
the risk of electric shock.
4. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
3/13
2013 ©OEM-TOOLS
20 GALLON (75L) PARTS WASHER
Working Capacity
Gallons
12 (45L) 31" x 21"x 34 1/2" (78.7 x 53.3 x 87.7cm)
5. Keep children away. All children should be kept
6. Do not operate this tool if under the influence of
7. Use safety equipment. Eye protection should be
1
Assembled Dims (Inches)(CM)
Length Width Height
away from the work area. Never let a child handle a
tool without strict adult supervision.
alcohol or drugs. Read warning labels on prescrip-
tions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do
not attempt to operate.
worn at all times when operating this tool. Use ANSI
approved safety glasses. Everyday eyeglasses are
NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat, or hearing protection should be
used in appropriate conditions.
24801
Weight
(Lbs) (Kgs)
52 23.6