Disassemble The Lcd Unit; Remove The Lcd Bezel - Lenovo ThinkBook 16p NX ARH Hardware Maintenance Manual

"Remove the lower case" on page 28
"Remove the battery pack" on page 29
"Remove the touch pad board cable" on page 29
"Remove the speakers" on page 31
"Remove the solid-state drive" on page 31
"Remove the Wi-Fi card" on page 34
"Remove the heat sink" on page 36
"Remove the system fans" on page 37
"Remove the I/O board" on page 38
"Remove the DC-in cable" on page 40
"Remove the system board, fingerprint reader board cable (for selected models) and I/O board cable" on
page 42
"Remove the LCD unit" on page 44
Go to
https://support.lenovo.com/partslookup
replacement part:
Upper case assembly

Disassemble the LCD unit

The LCD unit as a whole is not an FRU. Instead, it contains FRUs as its components. Before disassembling
the LCD unit, make sure it has been detached from the upper case assembly.

Remove the LCD bezel

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 44
Step 1. Remove the LCD bezel carefully.
Note: The LCD bezel is fragile and should be replaced if damaged.
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
47