Afloia GALA - AIR PURIFIER Manual

POINTS FOR ATTENTION

Before using, please read this user manual carefully and keep it for future reference.

1. To avoid electric shock and fire, do not allow water, liquid or any flammable detergent to get into or to clean the product.
2. Do not spray insecticide, perfume or other flammable spray around the products.
3. Before connecting the power supply, please check whether the voltage of the product is consistent with the local power supply voltage.
4. This product can not replace normal ventilation, daily dust collection or oil pumping when cooking.
5. Ensure the product is used in condition of a stable and horizontal level.
6. Leave at least 30cm of space on the back and sides of the product, and at least 50cm of space above the product when using.
7. Ensure both the filter and its cover are properly installed before using.
8. Do not insert finger or other things into the air outlet/inlet to prevent physical damage or trouble

PRODUCT OVERVIEW

Components

Control Panel

	Power Button
	Timer Button
	Light Control Button
	Wind Speed Button

SPECIFICATIONS

INSTALLATION FILTER

Notice

• Please remove the packaging of the filter before using for the first time.
• Ensure the machine is unplugged before removing or installing the filter.
• When the power indicator keeps flashing in red, the filter should be replaced.
• Please wipe the dust on the filter regularly, do not wash or use it repeatedly.
• Please use the filter specially designed for this product.

Steps of Installing Filter

Unplug the power socket of the machine before replacing or installing the filter.

1. Invert the machine, and rotate the base along the direction marked "OPEN"
2. Take out the filter from the machine.
3. Remove the packaging of the filter.
4. Install the filter into the machine.
5. Then Install the base, rotate and tighten the base along the direction marked "CLOSE.

Notice:

1. Please press the power button for 7s to reset after installing a new filter and the red light will stop flashing.
2. When using the device for the first time, please remove the packing of filter before using but please not to reset the device.

FUNCTION INSTRUCTION

Insert the plug into the power socket, the buzzer will ring for 1 second, which indicates the device connects with power.

Button Operation

Power Button

1. Touch the power button to turn on the air purifier; When the buzzer rings once, the power indicator, low-mode indicator, and night lights are on. The device starts to work at the low mode by default.
2. Touch the power button again, the buzzer will ring once and the device will stop running with all lights off.

Notice: In case of constant power supply, turn off the device and then turn on again, it will default shutdown before the working state.

Timer Button

1. ln the condition of working, touch the timer button to set 2H, 4H or 8H with buzzer ringing once, and the corresponding indicator keeps on.
2. The device will work continuously when the timer indicator turns off.
3. In the status of timing, the machine begins to count down. When the time is up, the device will stop working

Notice: The timer button couldn't operate in the status of shutdown.

Wind Speed Button

1. ln the condition of working, the buzzer will ring once every time when touching the wind speed button.
2. At can be set at Auto-High-Low working modes and the corresponding indicator lights on.
3. In Auto mode, the wind speed will change automatically complying with air quality.
   When the LED light is turned on, it will display different color LED light to show the air quality
   (Blue color means that the air quality is Good; Yellow is normal; and Red is bad).
   When the air quality is bad, the wind speed will change to High mode;
   When the air quality is normal, it will change to Middle mode;
   When the air quality is good, it will change to Low mode.

Notice: The wind speed adjustment couldn't operate in the status of shutdown.

Night Light Button

1. Touch the light button, the buzzer will ring once, the device enters soft light mode.
2. Touch it again, the buzzer will ring once and the LED light will turn into standard mode.
3. Touch it one more time, the LED light will turn off.

Notice:

1. When the device detects the filter needs replacing a new one, the LED light will keep flashing in red color.
2. Please press the power button for 7s after installing a new filter. Then the device will start to countdown the lifespan of the filter.

MAINTENANCE

Notice

• Ensure the machine is unplugged before maintenance.
• Do not immerse the machine into water or any liquid.
• Do not use abrasive, corrosive or flammable cleansers (such as bleach or alcohol) to clean any part of the unit.
• Don't use a vacuum cleaner to clean the filter or wash it directly.
• Please sterilize the filter under sunlight regularly.

Cleaning & Storage

1. Ensure the machine is power-off and unplugged.
2. Use a soft cloth with neutral cleanser to clean away any dust or debris from the surface of the unit and air inlet/outlet.
3. After the machine completely dry out, put on the bag and place it in a cool and well-ventilated place.
4. If you do not use it for a long time in the basic of previous steps, please turn on the machine for a few minutes from time to time to ensure a good performance.

Notice: Please don't drop any water into the machine when clean the air outlet.

FAQ

Notice: If the above FAQ can not solve your problems and need maintenance, please contact the supplier or after sales service center. Please do not disassemble the machine to maintain by yourself.

Please read the user manual carefully before use, and keep it for future reference.