Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used.
Page 3
Hardware x 28 B x 20 C x 8 D x 40 Ø6 x 35mm Ø15mm Ø12mm Ø8 x 30mm M 7 x 50 mm Ø6 x 30mm Ø5 x 15mm M 6.4 x 35 mm M 4.5 x 12.5 mm Ø8 mm M 3.5 x 25 mm 25 x 15 x 2 mm...
Page 4
Non Laminated Surface STYROFOAM Laminated Surface x 10 Ø6 x 35mm Ø8 x 30mm Ø6 x 35mm Ø8 x 30mm Ø6 x 30mm...
Page 5
Non Laminated Surface STYROFOAM Ø15mm Ø15 mm Ø12mm...
Page 6
Non Laminated Surface M 7 x 50 mm Ø12mm Ø15mm STYROFOAM...
Page 7
x 10 Ø6 x 35mm Unplug the dowel x 16 M 4.5 x 12.5 mm 25 x 15 x 2 mm Ø8 x 30mm...
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
Page 14
Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP ! US office: Fontana UK office: Ipswich AU office: Truganina Contact Us ! Do NOT return this item. US:cs.us@costway.com UK:cs.uk@costway.com AU:cs.au@costway.com...
Need help?
Do you have a question about the HV10228 and is the answer not in the manual?
Questions and answers