Connecting Water Hose To The Product; Connecting To Water Mains - Beko GNE460520DVPS User Manual

Installation
3.6. Connecting water
hose to the product
To connect the water hose to the
product, follow the instructions
below.
1. Remove the connector on the hose
nozzle adaptor in the back of the
product and run the hose through the
connector.
2. Push the water hose down tightly and
connect to the hose nozzle adaptor.
3. Tighten the connector manually to fix
on the hose nozzle adaptor. You may
also tighten the connector using a pipe
wrench or pliers.
Refrigerator / User Manual
3.7. Connecting to
water mains
(Optional)
To use the product by connecting to
the cold water mains, a standard 1/2"
valve connector must be installed to the
cold water mains in your home. If the
connector is not available or if you are
unsure, consult a qualified plumber.
1. Detach the connector (1) from the tap
adaptor (2).
3
2. Connect the tap adaptor to the water
mains valve.
9 / 44 EN
2
1