Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PowerPac my Choice MC7008
Summary of Contents for PowerPac my Choice MC7008
- Page 1 ELECTRIC KETTLE GLASS JUG 1.8L WITH AUTO SWITCH MC7008...
- Page 2 Parts & Description Spout Lid Button Handle ON/OFF Switch Indicator Light Heating Plate Kettle Jug Base...
- Page 3 Warnings ATTENTION : Read this booklet carefully as it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference. The following basic precautions should always be followed when using electrical appliances: 1. Read all instructions before using the appliance. The Appliance 2.
- Page 4 9. Only use original components & accessories provided by the manufacturer. Any non-original component or accessory NOT recommended by the manufacturer may cause injuries to persons or damage to the appliance. DO NOT use other Bases or Kettle Jugs belonging to other models from the same manufacturer or other manufacturers.
- Page 5 b. Press the Lid Button inwards to lift the Lid. Fill the Kettle Jug with clean water to maximum capacity, and place it on the Base. Press the ON/OFF Switch on the Handle up. Close the Lid. c. Place the Base on a dry, horizontal, stable and heat-resistant surface. Plug the power cable attached to the Base into the wall socket.
- Page 6 touch any part of the appliance, except the Handle, ON/OFF Switch and power cable, when the appliance is filled with hot/boiling water. The Base and the bottom of the appliance become exceedingly hot as the appliance operates. Do note that the liquids & gases inside the appliance itself would still be very hot during heating, and for some time after the plug has been pulled out of the wall socket;...
- Page 7 How to use Filling Water 1. Switch the wall switch OFF and unplug the power cable from the wall socket when not in use and before filling, emptying and cleaning the appliance. 2. Fill the appliance by pressing the Lid Button inwards to lift the Lid. Fill the appliance with clean water to maximum capacity.
- Page 8 Re-boiling and Re-heating 8. Once the water has boiled, the ON/OFF Switch comes up 9. Pressing the ON/OFF Switch down will not restart the heating process if the temperature sensing controller determines that the temperature of the water is not cool enough to require heating.
- Page 9 How to clean 1. Switch the wall switch OFF and unplug the power cable from the wall socket when not in use and before filling, emptying and cleaning the kettle. 2. Pour out any water contained in the appliance. Wait for the appliance to cool. 3.
-
Page 10: Specifications
ENVIRONMENTAL TIP This appliance, along with all other electronic appliances, should, when it is no longer capable of functioning, be disposed with the least possible environmental damage according to the local regulations in your area. In most cases you can discard the appliance at your local recycling centre. -
Page 11: Warranty
3. This warranty does not cover the repair or replacement of part/s damaged by misuse, accidents, negligence, alterations, or modifications in any way, or repairs done by any repair organisation without the prior consent of PowerPac Electrical Pte Ltd. 4. Repair and service are to be performed at: 5 Changi South Lane #03-01 Singapore 486045. - Page 12 In accordance with the terms and conditions of this limited warranty as stated above, PowerPac Electrical Pte Ltd, at its expense shall provide free services for the appliance within the warranty period from its date of purchase from our Authorised...
Need help?
Do you have a question about the my Choice MC7008 and is the answer not in the manual?
Questions and answers