Table of Contents
Advertisement
Operation instructions
Operation modes
Each time
the "MODE"
mode is changed in sequence:
COOLING
DRY
Heating mode is NOT available for cooling only air conditioner.
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
Auto
Higher
At "FAN ONLY" mode, only "Higher","High","Medium""Low"
At "DRY" mode, Fan speed is set at "Auto" automatically, "FAN" button is ineffective
in this case.
"＋"
Press once to raise temperature setting by 1℃
"－"
Press once to lower temperature setting by 1℃
*HEATING, COOLING
Note: Heating mode is NOT available for cooling only models.
Note: Press and hold "
together for 3 seconds will alternate the temperature display
between the ℃ and °F scale.
Press ON/OFF button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
SWING, SMART, TIMER ON, TIMER OFF, CLOCK, SLEEP
will be specified in the following pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning. After 2－5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
Wait 3 minutes before restarting the appliance.
Selecting mode
button is pressed, the operation
FAN ONLY
HEATING
FAN mode
High
Medium
Low
Setting temperature
Range of available set temperature
16℃-30℃
" button and "
Turning on
AUTO
Lower
and
"Lower" are available.
" button
TEMP
and SUPER
3
4
1
MODE
ON/OFF
FAN
TURBO
TEMP
MUTE
LIGHT
SLEEP
TIMER
TIMER
CLOCK
ON
OFF
ECO
IFEEL
CLEAN
operation modes
Advertisement
Table of Contents
