HomeLink Universal Transmitter
It may be helpful to have someone
assist you with this procedure.
1. Make sure you have properly
completed the "Training the
Transmitter" procedure.
2. Find the "Training" button on your
garage door opener unit. The
location will vary, depending on
the manufacturer. The
manufacturer's documentation
may help.
Instruments and Controls
TRAINING BUTTON
3. Press the Training button on the
garage door opener unit until the
light next to the button comes on,
then release it. The light may blink,
or come on and stay on. You then
have approximately 30 seconds to
complete the following steps.
4. Press and release the button on
the HomeLink transmitter. (The
same button you trained with the
"Training the Transmitter"
procedure.)
5. Press and release the HomeLink
transmitter button again. This
should turn off the training light
on the garage door opener unit.
(Some systems may require you to
press and release the button up to
three times.)
6. Press the transmitter button again.
It should operate the garage door.