Page 1
ASSEMBLY INSTRUCTIONS TWIN/TWIN BUNK BED WITH SLIDE If you have any questions, please feel free to contact us Email: service@qualfurn.net WF295848/WF295849...
SAFETY WARNING 1. This bed is designed for use only mattress (es) meeting the following specifications on the upper bunk, and lower bunk: Upper bunk (Bunk bed and tribed included) Bed type Length Width Thickness Twin Standard 74"-75" 38 1/2" 6"...
Page 3
SAFETY WARNING 1. At the beginning : Tighten all hardware. Chesk metal parts for rust. If found, sand and repaint using a non-lead-based paint meeting the requirements of 16 CFR 1303. Chesk all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members.
Part List WF295848 Leg (Left Front ) - 1pc Leg (Left Back ) - 1pc Leg (Right Front ) - 1pc Frame HB - 1pc Upper side rail (front) -1pc Leg (Right Back ) - 1pc Side rail - 3pcs...
Page 6
Part List Hardware List WF295849 Frame HB & FB - 3pcs Vertical guard rail - 2pcs Guard rail support - 1pc Upper (Left Front) - 1pc Upper (Right Front) - 1pc Horizontal bar - 1pc Upper (Back) - 2pc Step ladder - 3pcs Slide base support -1pc Top panel - 1pc Bottom panel - 1pc...
Page 21
STEP 28: 42PCS 3.1" 3.3" 2.4" 79mm 84.5mm 61mm Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break. Do not lock the bed slats on the edge of the wood, please hold firmly before screwing ,...