1. Manuals
  2. Brands
  3. Lumix Manuals
  4. Camera Lens
  5. S-R70200
  6. Service training manual

Lumix S-R70200 Service Training Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Service Training Manual
(Edition of Lens Cleaning)
Specifications
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
"LUMIX S PRO 70-200 mm F4 O.I.S."
Mount
Focal length
Lens construction
Aperture type
Maximum aperture
Minimum aperture value
Angle of view
Recording range
Maximum image magnification
Image stabiliser
Filter diameter
Maximum diameter
Overall length
Mass (Weight)
Dust and splash resistant
Recommended operating
temperature
Permissible relative humidity
S-R70200
Leica Camera AG L-Mount
f=70 mm to 200 mm
23 elements in 17 groups
(1 aspherical lens, 1 UED lens, 3 ED lenses, 1 UHR lens)
9 diaphragm blades/Circular aperture diaphragm
F4.0
F22
34°(Wide) to 12°(Tele)
0.92 m (3.02 feet) to ∞ (from the focus distance reference line)
0.25×
Yes
77 mm
Φ84.4 mm (3.3 inch)
Approx. 179 mm (7.0 inch)
(from the tip of the lens to the base side of the lens mount)
Approx. 985 ｇ (2.17 lb) (excluding the external tripod mount)
Yes
－10 ℃ to 40 ℃ (14 ℉ to 104 ℉)
10%RH to 80%RH
ⓒ Panasonic Entertainment & Communication Co., Ltd. 2023.
Unauthorized copying and distribution is a violation of law.
Ver.1.0
Internal use only

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S-R70200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lumix S-R70200

  • Page 1 Service Training Manual (Edition of Lens Cleaning) Ver.1.0 Internal use only Specifications INTERCHANGEABLE LENS FOR DIGITAL CAMERA “LUMIX S PRO 70-200 mm F4 O.I.S.” Mount Leica Camera AG L-Mount Focal length f=70 mm to 200 mm 23 elements in 17 groups...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE 1 Service Navigation ・　・　・　・　・　・　・　・　・　・ 1.1. Introduction ・　・　・　・　・　・　・　・　・　・ 1.2. Overview of Cleaning Components ・　・　・　・　・　・　・　・　・　・ 1.3. Cleaning Service Flowchart ・　・　・　・　・　・　・　・　・　・ 2 Exploded View ・　・　・　・　・　・　・　・　・　・ 3 Replacement Parts ・　・　・　・　・　・　・　・　・　・ 4 Service Jigs & Tools ・　・　・　・　・　・　・　・　・　・ 5 Disassembly Instructions ・　・　・　・　・　・　・　・　・　・ 5.1.

  • Page 3: Service Navigation

    1 Service Navigation 1.1. Introduction This manual describes the procedures for conducting the lens cleaning of full-frame Interchangeable Lens S-R70200. This procedures explain to eliminate a debris and dust which invaded into the inside the lens during use. For lens cleaning it requires to overhaul the lens unit, thus the lens unit disassembles and assembles its components.

  • Page 4: Cleaning Service Flowchart

    1.3. Cleaning Service Flowchart Check for Internal Dust Disassembly ⇒ Cleaning ⇒ Assembly - Begin again after disassembly/assembly Visual Checking Finish * In case that the process of Disassembly->Assembly->Inspection repeated for 3 times, we suppose that the lens was NG and it needs to be replaced by new Lens.

  • Page 5: Exploded View

    2 Exploded View This diagram shows exploded view of lens components for lens cleaning. Only the components applied the parts number are supplied from spare parts. Other was not eligible. B227 B228 Alignment Washer B231 B232 1st Lens Frame Unit B222 B229 B221...

  • Page 6: Service Jigs & Tools

    4 Service Jigs & Tools The following Jigs and Tools are required for checking and servicing this Lens Unit. Jig Name Jig No. Remarks Torque Driver RFKZ0542 or RFKZ0456 Rp-Chart L-size SUKZ000034 600mm x 800mm Rp-Chart M-size SUKZ000035 300mm x 400mm Lens Cleaning Kit VFK1900BK Master Body...

  • Page 7: Disassembly Instructions

    5 Disassembly Instructions 5.1. Disassembly Flowchart 1 Decoration Ring 2 Front Ring 3 Filter Ring 4 1st Lens Frame Unit...

  • Page 8: Disassembly Procedure

    5.2. Disassembly Procedure Important Notice： Perform lens disassembly in the clean room (class 10,000/ Federal Standard 209D) since lens is delicate product and it dislikes a dust. When removing the Front Ring, use a Pin Face Wrench. 5.2.1. Removal of Decoration Ring 1.
  • Page 9 5.2.3. Removal of Filter Ring 1. Remove 6 screws (A) and Filter Ring. Filter Ring Screw (A) Screw (A) ｘ 6 5.2.4. Removal of 1st Lens Frame Unit 1. In order to return the 1st Lens Frame Unit to its original position, mark two places as shown in the figure below. 2.

  • Page 10: Lens Cleaning

    6 Lens Cleaning 6.1. Cleaning procedures of outside surface of the Lens 1. Blow off the dust on the Lens glass surface with the Blower, gently. (Do not blow strongly.) 2. Wipe out the dirt on the Lens glass surface with Lens Cleaning Kit (VFK1900BK) if necessary. (Consult the instruction sheet which is included in the Lens Cleaning Kit in details.) 【Cleaning Instruction】...

  • Page 11: Assembly Instructions

    7 Assembly Instructions 7.1. Assembly Flowchart 1 1st Lens Frame Unit 2 Filter Ring 3 Front Ring 4 Decoration Ring...

  • Page 12: Assembly Procedure

    7.2. Assembly Procedure Important notice： Perform lens disassembly in the clean room (class 10,000/ Federal Standard 209D) since lens is delicate product and it dislikes a dust. When tightening the screw, use a torque driver (RFKZ0542) with specified torque described in each step. When Installation the Front Ring, use a Pin Face Wrench.
  • Page 13 7.2.2. Installation of Filter Ring 1. Install Filter Ring. 2. Tighten 6 screws (A) in numerical order by using the torque driver with specified torque. Filter Ring ⑤ ④ ③ ⑥ Screw (A) Screw (A) ｘ 6 ① ② White Line on Lens Unit and Filter Ring ①...
  • Page 14 7.2.4. Installation of Decoration Ring 1. Insert Decoration Ring so that the center of the LUMIX "M" and the white line on the Lens Unit are aligned. ・Use new one, do not use the one which is removed. ・Double-stick tape sticks to Decoration Ring of the repair part. Remove the old double-stick tape from Front Ring.

  • Page 15: Optical Performance Check

    8 Optical Performance Check 8.1. Procedure of Visual Checking Mount repaired Lens on master body(DC-S1R). (valid pixels : 47M pixels image sensor) RP Chart Mount master body(DC-S1R) on tripod. Set the function parameter to below setting. - Mode dial : A (Aperture-Priority AE Mode) - Photo style : Standard - Aspect ratio : 4:3 - Aperture : F4 (Maximum aperture)
  • Page 16 RP Chart L-Size 600x800mm (SUKZ000034) RP Chart M-Size 300x400mm (SUKZ000035)

  • Page 17: Revision History

    9 Revision History Ver. Date History 2023.02.13 ・First Issue...

Table of Contents