Care And Maintenance - BLUE SKY OKCSS-FAUCET Owner's Manual

Use M10 male connector to connect your
water supply to the faucet hot and cold
water connections. Check for leaks before
using.

CARE AND MAINTENANCE

• To keep your faucet looking clean and fresh, wash with fresh water, a mild
detergent and a micro fiber cloth. Then rinse with clean water and dry with
a soft cloth, go with the grain on any brushed stainless-steel surface. If
preferred, you can use products specifically designed to clean stainless steel.
• Do not use abrasive cleaners or sponges / pads that are abrasive, these
products will dull the finish and harm the longevity of the product.
• Also, stainless-steel may show "tea" staining if not washed often in costal
locations or in close proximity to a chlorine or saltwater swimming pool.
• If your stainless-steel shows signs of oxidization, take the following steps
to rejuvenate its appearance. First, try cleaning with fresh water and a non-
abrasive cleaning sponge. If you run into a stubborn stain, use a stainless-
steel cleanser (follow the cleanser's direction - follow warnings with regard to
use on a food preparation surface).
• NOTE: Always rub / wipe / clean the stainless-steel with the grain. Wiping
across the grain can ruin the finish and cause the stainless-steel to lose its
brilliance.
• Water with high iron content can leave rusty residue.
• Salt that is left sitting on the products or gets splashed up on the cabinets
in snowy weather can cause corrosion.
• Trapped moisture under cutting boards, rubber mats, metal trays or cans
could lead to corrosion.
7 | www.bluesk youtdoorliving.com