Visus Active Series Quick Start Manual

IP CABLING TRANSMISSION – Active Series
ITEM NO.: IP02P IP Extender with Power over Coax
IP02P Extender is designed to send and extend IP or POE camera or any TCP/IP
10/100BaseT devices over existing coax cable.
RG6U 75Ω Coaxial Cable. They are completely transparent to protocols, codes, and
applications ensuring compatibility with any IP, POE camera and its management software.
It is perfect solution for sending IP Video links and Power to remote camera installation
that are beyond the 100 meters distance limit of Ethernet.
IP02P IP Extender with Power over Coax
Send any extend IP / POE camera or any TCP/IP devices over existing coaxial cable.

Maximum range up to 180 meters over RG6 75Ω Coaxial Cable, 125 meters over RG59

75Ω Coaxial Cable.
Ability to send power over coax to IP/POE camera (DC5V, DC12).

Support 10/100BASE-T transmission rate.

Built in LED status indication.

Package include external DC48V power adapter.

Installation View:
1. Connect IP02PT, IP02PR with coax cable at both ends before powering.
2.Power input could use external DC 48V adapter or POE Injector to IP02PR unit.
3.Before sending power to IP02PR, please make sure IP02PR with correct power
switch to avoid any equipment damaged. (Power Switch: POE or DC. DC by 5V or
12V.)
The distance could up to 180 meters by
1