Do you have a question about the High Pressure Water Mist System and is the answer not in the manual?
Questions and answers
Summary of Contents for ICO High Pressure Water Mist System
Page 1
High Pressure Water Mist System ® User Manual Industry leaders in domestic and residential fire suppression systems...
Page 2
® High Pressure Water Mist System End User Manual This manual should be kept adjacent to the pump along with the commissioning & maintenance certificates for the system. Your iCO ® Water Mist System Congratulations on the installation of your iCO ®...
® High Pressure Water Mist System End User Manual This manual should be kept adjacent to the pump along with the commissioning & maintenance certificates for the system. Table of contents End user instructions Following a system activation due to fire (live activation)
• Do not cover the nozzles. • Do not attempt to remove the nozzles. • Do not touch the heat sensitive bulbs. • Do not attempt to modify the system yourself. This should only be carrried out by a a certified iCO installer. ®...
Page 5
Following evacuation do not re-enter the building until the fire brigade has indicated that it is safe to do so. Once it has been deemed safe to re-enter the property, the iCO system will need to be turned off by following the ®...
Page 6
® High Pressure Water Mist System End User Manual This manual should be kept adjacent to the pump along with the commissioning & maintenance certificates for the system. Actions following a system activation. SYSTEM ACTIVATION DUE TO ACCIDENT, DAMAGE OR FAULT...
Water Mist Pump can be equipped with GSM Monitoring to provide real time alerts for up to three smart ® phones in case of an emergency or fault. This feature can added at any time by contacted by certified iCO installer.
Trigger. (OPTIONAL FEATURE) The iCO® water mist nozzles are highly reliable and can be activated by a double knock trigger (heat and smoke) as an option to reduce the risk of false activation. Any iCO® Water Mist System with this feature enabled will not activate in case of accidental or malicious damage to the nozzles or pipework;...
Immediately before the self-test, the control board will emit a continuous beep for 4 seconds. No action is required. In the event of any other signal, you should contact your certified iCO installer and refer to the below table for ®...
This manual should be kept adjacent to the pump along with the commissioning & maintenance certificates for the system. Maintenance. The iCO Water Mist System must be inspected at least once a year by a certified iCO installer. Failure to properly ® ®...
Page 11
® High Pressure Water Mist System End User Manual This manual should be kept adjacent to the pump along with the commissioning & maintenance certificates for the system. Maintenance Log Date Maintenance company Name (print) Signature Notes...
Page 12
High Pressure Water Mist System End User Manual ® This manual should be kept adjacent to the pump along with the commissioning & maintenance certificates for the system. A smarter and safer means to protecting your property from fire damage.
Need help?
Do you have a question about the High Pressure Water Mist System and is the answer not in the manual?
Questions and answers