Advertisement
Changing the warning set points and fuel sender set-up:
The white/blue wire is used for this setup. You can strip the end and touch the wire end to power or connect a push button switch.
Make sure the blue wire is not powered during the setup routine, it will interfere with the setup.
1.
Begin with the key off.
2.
Power the white/blue wire.
Turn the key on. The display will show "SETUP" in the upper left corner. The volt, water, and oil will each show their
3.
current warning set points. The fuel display will show the current sender setting.
4.
Release the white/blue wire. The current fuel setting number will be displayed in the left display. The top display will show
the full sender resistance and the bottom display will show the empty sender resistance. Fuel sender #0 can be
programmed to a custom resistance range.
5.
Momentarily power the white/blue wire to change the sender type. Hold the white/blue wire to power for several seconds
to save the setting and go on.
Release the white/blue wire. The display will show the current temperature unit and label. "F" for Farenheit and "C" for
6.
Celsius and either "WATER" or "TEMP".
7.
Momentarily power the white/blue wire to change the unit and label type. Hold the white/blue wire for several seconds to
save the setting and go on.
8.
Release the white/blue wire. The current high temperature warning point will be displayed.
9.
Momentarily power the white/blue wire to change the set point. Hold the white/blue wire to power for several seconds to
save the setting and go on.
10. Release the white/blue wire. The display will show the current low oil warning point.
11. Momentarily power the white/blue wire to change the set point. Hold the white/blue wire to power for several seconds to
save the setting and go on.
12. Release the white/blue wire. The display will show the current low voltage warning point.
13. Momentarily power the white/blue wire to change the set point. Hold the white/blue wire to power for several seconds to
save the setting and go on.
14. Release the white/blue wire. The display will show "End" unless the custom fuel sender setting was selected. If "End" is
displayed, turn the key off.
15. If fuel sender #0 was selected, the display will show "00" in the left display and "Set" in the bottom display. The top display
will show the resistance seen on the purple fuel sender wire. A reading of "EEE" indicates that the resistance is too high or
nothing is connected.
16. Make sure the fuel sender is at its empty position and then momentarily power the white/blue wire. The left display will
switch to "33".
17. Move the fuel sender float to its 1/3 full position (33%). Momentarily power the white/blue wire. The left display will switch
to "66".
18. Move the fuel sender float to its 2/3 full position (66%). Momentarily power the white/blue wire. The left display will switch
to "99".
19. Move the fuel sender float to its full position. Momentarily power the white/blue wire. The bottom display will show "End".
20. Turn the key off.
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions
or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems.
Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization
number. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMA
number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone
number where you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase. Send no
money. We will bill you after repair.
DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or
workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital's option.
This warranty does not cover nor extend to damage to the vehicle's systems, and does not cover removal or reinstallation of the product. This Warranty does
not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or
accident.
This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be
limited to the duration of this written warranty. Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within
a period of 24 months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in
connection with the sale of this product.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to
SERVICE AND REPAIR
Dakota Digital 24 Month Warranty
www.P65Warnings.ca.gov
MAN# 650102A
Advertisement
