Summary of Contents for Sea Recovery Aquamatic
- Page 34 Salinity sensor fault detected. Possible sensor failure. Only manual mode permitted. Product flow sensor fault detected. Possible sensor failure. By-pass to continue.
- Page 35 Brine flow sensor fault detected. Possible sensor failure. By-pass to continue. High pressure pump inlet pressure low. Please check filtration for high fouling. High pressure pump inlet pressure high. Pump damage can occur if started. HP pump inlet sensor in by-pass & HP pump outlet pressure low.
- Page 36 HP pump outlet exceeded maximum permissible pressure. System stopped. HP pump outlet sensor in by-pass & brine flow low. Possible cavitation. Brine flow low during manual operation. Possible pump cavitation. Brine flow low during fresh water flush. Possible loss of feed supply.
- Page 37 Operation requested in feed water warmer than system temperature specifications. Operation requested in feed water colder than system temperature specifications.
- Page 39 Extended delay in production of potable water. Check settings & feed water quality.