Trademarks Hyper, the ++Hyper logo, and HyperDrive are trademarks or registered trademarks of Targus International LLC, in the U.S. and in certain other countries. USB-C is a registered trademark of USB Implementers. Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 Class B of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received and include interference that may cause undesired operation.
Introduction The HyperDrive Dual HDMI 10-in-1 Travel Dock is easy to carry, and the Hub with multiport function to connect your USB-C laptop to multiple devices. The Dock can be seamless to connect 10 kinds of devices, with this USB-C multiport hub you can connect HDMI display, 4K60Hz monitors, USB-C PD to your laptop.
Product Overview (Left Side) Item Description 1. 3.5mm Audio Port Connects to a headset 2. USB-C Port Connects to a USB-C device 3. USB-A Port x 2 Connects to a USB-A device 4. HDMI Port Connects to a HDMI monitor 5.
Page 7
Product Overview (Right Side) Item Description 7. Ethernet Port Connects to Ethernet network Connects to a Max 100W USB-C 8. USB-C PD Port PD Power Adaptor 9. SD Card Connects to a standard SD Card 10. Micro SD Card Connects to a standard Micro SD Card...
HYPER DRIVERLESS DISPLAY TECHNOLOGY SETUP FOR WINDOWS 1 Connect the USB-C Display Hub to your Windows computer. 2 The computer will ask if you want to open a drive. Open the drive, then select “Windows InstantView.exe.”. 3 A permission screen should appear, asking if you want to install the software.
Page 10
4 A Hyper Plug & Play window will appear. Simply hit connect and you will get to choose between Extended Mode or Mirrored Mode. EXTENDED MODE: Switch to Extended Display Disconnects Monitor MIRRORED MODE: Switch to Mirrored Display Disconnects Monitor...
SETUP FOR MAC 1 Connect the USB-C Display Hub to your Mac computer. 2 Double-click the HYPERDISPLY icon on your desktop screen. 3 Click on the drive, then click on the “macOS InstantView” application. 4 The application will check for updates. It is recommended that you choose to update to the latest version.
Page 12
Mirrored or Extended Display and send them over USB from your computer to the chosen Display. It does not send any data or pixels back to Hyper. To activate this, you’ll want to open System Preferences and locate Security & Privacy.
Page 13
à travers le monde, veuillez consulter www.HyperShop.com. La garantie des produits Hyper ne couvre pas les appareils ou produits qui ne sont pas fabriqués par Hyper (y compris, mais sans s’y limiter, les ordinateurs portables, les smartphones, les appareils ou tout autre produit pouvant être utilisé...
Page 14
(including, without limitation, laptops, smartphones, devices, tablets, or any other non-Hyper item) that is used in connection with the Hyper product. In the event that the Hyper product has a defect in materials or workmanship Hyper will, after receiving a warranty claim and inspecting the product, at its discretion, do...
Safety Warnings • Do not expose to moisture or submerge in liquid. • Store in a cool, dry place. Recommended storage temperature: -10°C/14°F to 70°C/158°F, Operating temperature: 0°C/32°F to 40°C/104°F • Do not disassemble or attempt to re-purpose or modify the product in any manner. •...
Need help?
Do you have a question about the HYPERDRIVE HDM1H and is the answer not in the manual?
Questions and answers