Poole Lighting 3042R Quick Start Manual

Distance warning
0.5m
This product must be positioned so that there is at least 0.5 metres (50cm) between the bulb and
any illuminated surface.
MINIMUM DISTANCE
FROM LIT OBJECTS
Fitting/replacing bulbs
• The LED module in these spike lights are non replaceable.
Care & Use
Do not use abrasive materials and cleaners on these products as this may damage the finish. Do not clean the units
with a pressure washer. To prolong the life and keep your outdoor lighting in good condition, it is recommended that
periodically it is cleaned using a soft cloth followed by the application of a light coating of oil, such as WD40.
This system contains non-replaceable parts which cannot be serviced. If damage occurs the part should be scrapped.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before adjusting or cleaning.
The light source cannot be replaced due to IP protection becoming compromised.
This product contains a light source of energy efficiency class E.
Manufactured by: Poole Lighting Ltd.
UK: BH17 7BY
EU: Brilliant AG, Brilliantstrasse 1, D-27442 Gnarrenburg
Mirage Spike Lights
3042R
06/09/2023