Advertisement
Quick Links
WARNING ATTENTION!
READ THESE WARNINGS AND MATERIALS BEFORE ASSEMBLY AND USE OF THE EQUIPMENT.
Geometric Climbing Dome
Owner's Manual & Assembly Instructions
gobaplay
is a registered trademark of goba Sports Group, Inc. in the USA, Canada, and
TM
other countries. ©2023
Manufactured, imported, and distributed under license by Core Sports Inc., 151 Whitehall
Drive, Markham, Ontario, Canada L3R 9T1
SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE. IF YOU NEED TO ORDER
REPLACEMENT PARTS, CONTACT CUSTOMER SUPPORT:
customercare@gobaplay.com.
773601
Advertisement
Summary of Contents for goba Sports Group gobaplay Geometric Climbing Dome
- Page 1 Geometric Climbing Dome Owner’s Manual & Assembly Instructions gobaplay is a registered trademark of goba Sports Group, Inc. in the USA, Canada, and other countries. ©2023 Manufactured, imported, and distributed under license by Core Sports Inc., 151 Whitehall Drive, Markham, Ontario, Canada L3R 9T1 SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE.
-
Page 2: Before Assembly
WARNING specifically designed for use with the equipment, such as, but not limited to, jump READ THESE WARNINGS AND MATERIALS ropes, clotheslines, pet leashes, cables, and chains, as they may cause a BEFORE ASSEMBLY AND USE OF THE strangulation hazard. EQUIPMENT. - Page 3 WARNING *This data is from tests conducted by independent testing laboratories on a 6 in. (153 mm) depth of uncompressed READ THESE WARNINGS AND MATERIALS shredded tire samples produced by four manufacturers. The tests reported critical heights ranging from 120 in. (3 BEFORE ASSEMBLY AND USE OF THE m) to greater than 144 in.
-
Page 4: Maintenance Instructions
MAINTENANCE INSTRUCTIONS WARNING READ THESE WARNINGS AND MATERIALS If routine checks and maintenance procedures are not done, the equipment could BEFORE ASSEMBLY AND USE OF THE overturn and/or become a hazard. EQUIPMENT. AT THE BEGINNING OF EACH PLAY SEASON: Tighten all hardware. Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles—You may be interested Lubricate all metallic moving parts. - Page 5 ASSEMBLY WARNING READ THESE WARNINGS AND MATERIALS BEFORE ASSEMBLY AND USE OF THE EQUIPMENT. THIRD-PARTY ASSEMBLY Diagonal Frames 32.6 in.(828 mm) Customers may, in their sole discretion, elect to use a third party person or service to assemble this product. gobaplay assumes no responsibility or liability for any charge incurred by the customer for any assembly services.
- Page 6 ASSEMBLY Part Quantity Part Quantity Horizontal Frames 45.7 in.(1160 mm) Anchor Plates Diagonal Frames 35.2 in.(895 mm) Anchor Augers Horizontal Frames 45.7 in.(1160 mm) Small Bolts Diagonal Frames 35.2 in.(895 mm) Large Bolts Horizontal Frames 39.8 in.(1011 mm) Cap Nuts Diagonal Frames 33.7 in.(856 mm) Nuts Horizontal Frames 30.2 in.(766 mm)
- Page 7 ASSEMBLY ASSEMBLY NOTE - For this step only, make sure that the bolts are aligned so that the NOTE - For the rest of the steps, make sure that the bolts are aligned so that head of the bolts are on the outside of the frames and the cap nuts face the the nuts are on the outside of the frames and the head of the bolts faces the center.
- Page 8 ASSEMBLY ASSEMBLY Locate the bag of frames with the sticker. Locate the bag of frames with the sticker. Choose a connection point and unfasten an nut. Choose a connection point and unfasten an nut. Take two Frames and align them IN FRONT of the bolt connecting the Frames, Take two Frames and align them IN FRONT of the bolt connecting the...
- Page 9 ASSEMBLY ASSEMBLY Locate the bag of frames with the sticker. NOTE - Just a reminder to make sure that the bolts are aligned so that the Choose a connection point and unfasten an nut. nuts are on the outside of the frames and the head of the bolts faces the center.
- Page 10 ASSEMBLY ASSEMBLY Locate the bag of frames with the sticker. WARNING - Do not climb on the equipment until it is completely assembled. Choose a connection point and unfasten an nut, If using a ladder or stool during assembly, use extreme caution. Take two Frames and align them IN FRONT of the bolt connecting the Frames, as shown.
- Page 11 ASSEMBLY ASSEMBLY WARNING - Do not climb on the equipment until it is completely assembled. WARNING - Do not climb on the equipment until it is completely assembled. If using a ladder or stool during assembly, use extreme caution. If using a ladder or stool during assembly, use extreme caution. Locate the bag of frames with the sticker.
- Page 12 ASSEMBLY ASSEMBLY WARNING - Do not climb on the equipment until it is completely assembled. WARNING - Use the tools provided to tighten the bolts. The use of power If using a ladder or stool during assembly, use extreme caution. tools may cause severe damage to the frame.
- Page 13 GOBAPLAY LIMITED WARRANTY ASSEMBLY WHAT IS COVERED gobaplay warrants your product against original manufacturer’s defects in material and workmanship. All product components are warranted for two (2) years from the date of purchase (proof of purchase required). This warranty is only valid when used for private household purposes in accordance with the Owner’s Manual &...
- Page 14 WARRANTY LIMITATIONS This warranty contains certain limitations and gives you specific legal rights. You may also have other rights which vary by state, province or territory, unless exempted by local legislations and laws. gobaplay is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product or any other damages with respect to any economic loss, loss of property, loss of revenue, or profits, loss of enjoyment or use, cost of removal, installation, disassembly or...
Need help?
Do you have a question about the gobaplay Geometric Climbing Dome and is the answer not in the manual?
Questions and answers