Subscribe to Our Youtube Channel
Related Manuals for MasterForce 245-1990
Summary of Contents for MasterForce 245-1990
- Page 1 16" Side Locker Actual product may differ slightly from image shown Model #: 245-1990/245-1998/245-2002 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Symbols ................. 2 Safety Instructions ..............3 Parts List ................... 4 Assembly and Operation ............5 Maintenance and Safety ............8 WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov Page 1... -
Page 3: Safety Symbols
SAFETY SYMBOLS Model #: _______________________________ CAUTION: Place of purchase: ______________________ 1. Read and follow all safety and assembly instructions before using this product for the first time. Date of purchase: _______________________ 2. Fill in the following information and retain the manual for future reference: Receipt # of purchase: __________________ Do not open more than one drawer at a time. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures. -
Page 5: Parts List
PARTS LIST For service regarding parts, assembly or warranty information, please call: 1-800-459-4409. The keys are taped to the top shelf in the locker. NOTE: Ref# Description Part# 1. Replacement keys may be ordered, M6 x 16 Hex Bolt 321023 3 pcs using the required code which appears on the face of the lock. -
Page 6: Assembly And Operation
ASSEMBLY AND OPERATION HANG THE NECESSARY TOOLS REQUIRED FOR ASSEMBLY SIDE LOCKER • 10 mm socket • Phillips screw driver NOTE: Two or more people may be • Extension ratchet required to complete this step. IMPORTANT: THIS STORAGE LOCKER CAUTION: This product should not be WILL FIT ON VIRTUALLY ANY CABINET mounted on an empty cabinet. - Page 7 ASSEMBLY AND OPERATION INSTALL THE SHELVES TO REMOVE DRAWERS Insert the shelf support brackets into Pull the drawer out so it is almost fully extended. PUSH UP on the black release the slots on the side of the locker at lever on one side, while PULLING DOWN the desired height.
- Page 8 ASSEMBLY AND OPERATION TO REVERSE Put the door into position and fasten the screws on the hinge. THE DOOR The door is pre-installed with the hinge on the left. To install the door on the right, loosen the screws on the hinge and remove the door from the locker.
-
Page 9: Maintenance And Safety
MAINTENANCE AND SAFETY MAINTENANCE WARNING: DO NOT tow with power equipment. The product could Lubricate the slides twice a year with a tip, which may cause personal injury or product like WD40 or other quality lubricant. product damage. This is especially important when the WARNING: temperature decreases, as the bearing can DO NOT alter this... - Page 10 NOTES Page 9...
- Page 11 16" Side Locker LIMITED LIFETIME WARRANTY MASTERFORCE Tool Cabinets and Chests have been manufactured to the ® highest standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product.
- Page 12 ©2017 Menard, Inc., Eau Claire, WI 54703 V4 08/2020...
Need help?
Do you have a question about the 245-1990 and is the answer not in the manual?
Questions and answers