Advertisement
Quick Links
PT-8100 USER GUIDE
Tracking Portal:
https://lvgps.net
POWER ON THE PT-8100
Firmly Press & Hold The Power Button located on the top left corner of
●
the PT-8100 above the LED lights. Press the Power Button for at least 3
seconds.
CHARGE TIMES
● Internal Battery: 3.5 Hours
● Extended Battery: 12 Hours
LiveViewGPS Inc. | LiveViewGPS.com | 661-294-6805
Advertisement
Related Manuals for LiveView GPS PT-8100
Summary of Contents for LiveView GPS PT-8100
- Page 1 POWER ON THE PT-8100 Firmly Press & Hold The Power Button located on the top left corner of ● the PT-8100 above the LED lights. Press the Power Button for at least 3 seconds. CHARGE TIMES ● Internal Battery: 3.5 Hours ●...
-
Page 2: Led Light Status
CHARGING THE PT-8100 The Standalone PT-8100 Includes: USB Charging Cable, 120 VAC Charger. To Charge The PT-8100 Insert The USB Cable Into The USB port on the PT-8100. Charging Time Is Approximately 6 Hours. Once Fully Charged Expect 8-10 Motion Hours Of Live 10-Second GPS Tracking. When the device is not moving, it enters standby mode to save battery power, it updates positions every 8 hours when not moving. - Page 3 EXTENDED BATTERY CHARGING/USE The Extended Battery Kit Includes; Pelican Case with Magnetic Mount, 17.6 Ah battery, as well as battery to device adapter, and External battery charger cable. Device Will Automatically Turn On When Connected to the External Battery. Device will also Automatically Turn Off When Disconnected to the External Battery.
- Page 4 Approximate time to Full Charge is 16 hours. Once fully charged you can expect approximately 140 motion hours of tracking. When not moving, the PT-8100 goes into standby mode, and updates its position every 8 hours.
- Page 5 1. Insert External Battery Into Right Side Of Pelican Case. Ensure that the external charging cable is tucked into the side of the case. 2. Insert PT-8100 Into Left Side Of Case. Please Note The Orientation Of The USB Connector Cable - it faces into the case.