BenQ L1020 User Manual page 45

Setting the ISO
With the initial settings, the ISO sensitivity is automatically set according to the
brightness of the subject.
Option
Auto
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
T i p s
T i p s
Higher ISO speeds increase the image noise. To take clean images, use as low
an ISO speed as possible.
Setting the Exposure
Set the exposure value manually to compensate for unusual lighting conditions such as
indirect indoor lighting, dark backgrounds, and strong backlighting.
Setting the AEB
Sets the auto exposure bracketing (AEB) to shoot 3 continuous images, each with a
different exposure setting: correctly exposed, underexposed, and overexposed.
Setting the Highlight
Make the subject stand out from its surroundings. The subject will be in focus in three
different ranges:
T i p s
T i p s
The Photo Frame and Face Tracking cannot be used as when using the Highlight.
Sets the ISO sensitivity automatically.
Sets the sensitivity to ISO 100 equivalent.
Sets the sensitivity to ISO 200 equivalent.
Sets the sensitivity to ISO 400 equivalent.
Sets the sensitivity to ISO 800 equivalent.
Sets the sensitivity to ISO 1600 equivalent.
Sets the sensitivity to ISO 3200 equivalent. (available only for
3M resolution or lower)
/ /
37
Description