Troubleshooting; Maintenance; Battery Disposal - KMART Anko MK-B002 Manual

Magnetic bike
Table of Contents

Advertisement

TROUBLE SHOOTING:
1. Change the battery. To change the computer battery, please slide the computer from the
computer holder, remove the battery cover on the back of the computer console, and remove the
batteries. Replace with AA batteries. Finally put the cover back on the console, and slide the
computer back on the computer holder.
2. Computer not working correctly. If your computer is not working correctly, please check
whether the lower sensor wire is connected to the upper sensor wire, and make sure the upper
sensor wire is plugged into the computer.
computer still not working, then please make sure the batteries are installed correctly in the
computer and that the batteries are still working.
3. No resistance.
tension cable is connected to the lower tension cable.

MAINTENANCE

1.
Before using the bike, always make sure all bolts/nuts are fully tightened.
2.
A spent battery is hazardous waste, please dispose of it correctly, and do not throw it in the
trash.
3.
When eventually you want to scrap the machine, you should remove the batteries from the
computer, and dispose separately as hazardous waste.

BATTERY DISPOSAL

1.
A spent battery is hazardous waste - please dispose of it correctly and do not throw it in the
trash.
2.
When you eventually want to scrap the machine, you should remove the batteries from the
computer, and dispose of them separately as hazardous waste.
3.
Keep batteries out of the reach of small children. Batteries are extremely dangerous when
swallowed. If a battery has been swallowed, seek immediate medical treatment.
If there is no tension resistance on the bike, please make sure the upper
When you have checked the above, and the
11

Advertisement

Table of Contents
loading

Related Products for KMART Anko MK-B002

This manual is also suitable for:

43238552

Table of Contents