Sony G3226 User Manual page 12

• Trusted voice: Set up voice recognition to search in any screen.
The Smart Lock feature is developed by Google™ and its exact functionality may change over
time due to updates from Google™. Furthermore the feature may not be available in every
market, country or region.
To enable Smart Lock
1
Set a pattern, PIN or password as a screen lock if you have not already done
so.
2
From your Home screen, tap
3 Find and tap Settings > Lock screen & security > Trust agents.
4 Tap the Smart Lock (Google) slider to enable the function.
5
Tap the back arrow next to Trust agents.
6 Find and tap Smart Lock.
7
Enter your pattern, PIN or password. You need to enter these credentials
whenever you want to change your Smart Lock settings.
8
Select a Smart Lock type.
To set up or remove trusted face
1 From your Home screen, tap
2 Find and tap Settings > Lock screen & security > Smart Lock > Trusted face.
3
Tap SET UP > NEXT. Follow the instructions on your device, then tap
FINISHED.
4 To remove a trusted face, tap Remove trusted face > REMOVE.
For enhanced accuracy, tap Trusted face > Improve face-matching.
To set up trusted voice
1
From your Home screen, tap
2
Find and tap Settings > Lock screen & security > Smart Lock > Trusted voice.
3
Follow the instructions on your device.
Keeping your device unlocked while you're carrying it
Using the On-body detection feature, you can keep your device unlocked while
you're carrying it in your hand or in a pocket or bag. The accelerometer in your device
keeps your device unlocked while it senses that it's being carried. The device locks
when the accelerometer detects that the device has been put down.
When you use the On-body detection feature, you need to be aware of the following
behaviours:
•
Any time you put your device down and it senses that it's no longer being carried, it
locks automatically.
•
The device can take up to one minute to lock.
•
After you get into a car, bus, train or other land vehicle, your device can take between
5 and 10 minutes to lock.
•
Note that when you get on an airplane or a boat (or another non-land based vehicle),
your device may not lock automatically, so make sure to lock it manually if needed.
•
When you pick up your device again or get out of the vehicle, just unlock it once and
your device then stays unlocked for as long as you have it on you.
The On-body detection feature can't distinguish whose body is connected. If you give your
device to someone else while it's unlocked using On-body detection, your device may stay
unlocked for the other user. Keep in mind that On-body detection as a security feature is less
secure than a pattern, PIN, or password.
To enable or disable On-body detection
1 From your Home screen, tap
2 Find and tap Settings > Lock screen & security > Smart Lock > On-body
detection.
3 Tap the slider to enable the function, then tap CONTINUE. To disable the
function tap the slider beside On.
This is an internet version of this publication. © Print only for private use.
.
.
.
.
12