Advertisement
Advertisement
Table of Contents
Summary of Contents for Telkonet ecosmart EcoCommander 5.4
- Page 1 EcoCommander 5.4 Versions 8g, 16g, and 32g Server Setup Guide...
- Page 2 Company Headquarters: Customer Support: EcoSmart Sales: Telkonet, Inc. (800) 380-9640 (888) 703-9398 20800 Swenson Drive Email: Email Suite 175 support@telkonet.com sales@telkonet.com Waukesha, WI 53186 P (414) 302-2299 July 13, 2020 Updated IP address and subnet mask to default values. See page 4.
- Page 3 □ RS232 to RJ45 console cable (provided with EcoCommander purchase)(PRO version only) □ Cisco/HP switch console cable (Lite version only) Have this network information ready: EcoCommander WAN Configuration Information required: Enter information here: Property ID from Telkonet Project Manager (used as EcoCommander password) DHCP or Static Circle one: DHCP Static...
- Page 4 192.168.3.1 Subnet Mask (default) 255.255.255.0 Notify Telkonet if you do not wish to use the default IP address or subnet mask. Connect Ethernet Port to EcoCommander WAN Port Plug CAT5 cable into WAN2 port on EcoCommander server: Plug the other end into the Ethernet port on your PC or laptop:...
- Page 5 Open browser. Enter this address: 169.254.169.254 Enter. At the Login screen… Username: admin Password: use property ID from Telkonet project manager The LAN Configuration window opens: EcoCommander Server 5.4 Setup Guide Telkonet, Inc. Revision 2 20800 Swenson Drive, Suite 175...
- Page 6 The Status Information window will appear: There should be green check marks next to WAN Reachable and DNS Resolves. If there are not two green check marks, your Telkonet representative will instruct you on your next steps. EcoCommander Server 5.4 Setup Guide Telkonet, Inc.
Need help?
Do you have a question about the ecosmart EcoCommander 5.4 and is the answer not in the manual?
Questions and answers