Starting the chain saw
WARNING
There must not be anyone within the
swivel range of the chain saw.
Versions with manual fuel pump
Press the manual fuel pump bulb at
N
least five times – even if it is still full
of fuel
MS 271, MS 271 C, MS 291, MS 291 C
For all versions
1
Push the hand guard (1) forwards –
N
the saw chain is blocked
Simultaneously press the throttle
N
trigger lockout (2) and throttle
trigger (3) – set master control
lever (4)
Position cold start l
If engine is cold (even if the engine
–
has stalled during opening of
throttle after starting)
Position warm start n
If engine is warm (once the engine
–
has been running for approx. one
minute)
Hold and start the chain saw
N
When the engine has turned over for the
first time
4
Move the master control lever (4) to
N
the position warm start n
2
4
Hold and start the chain saw
N
3
Once the engine is running
Press the throttle trigger lockout and
N
blip the throttle trigger (3); the
master control lever (4) jumps to
run F and the engine begins to idle
English
4
4
4
4
3
31