Table of Contents
Advertisement
Tap
, Programs, GPS, and then GPS Viewer.
You may use this Pocket PC to automatically search the GPS
coordinates of your location and check if the GPS functions work properly.
GPS Viewer
1. Run this program in a location with
good signal reception.
Greenwich Mean Time (GMT):
After connecting to a satellite and
obtaining the GMT, it will be
displayed on the screen.
Tap to set the satellite time as the
system time.
Report GPS tracking information.
Tap to change the unit.
Switch to Satellite mode.
2. Tap Satellite to switch to Satellite
mode.
Red: Satellite detected (In View).
Blue: Satellite data detected (Data
Valid).
Green: Tracking completed
(Tracker).
Signal strength: The larger the
figures, the stronger the signal.
Satellite ID: The IDs expressed in
numbers in this field correspond to
the IDs on the earth image above.
Switch to Compass mode.
Voice Command Satellite Navigation 3-9
Advertisement
Table of Contents
