Table of Contents
Advertisement
Troubleshooting
Information codes
Code symbol
Meaning
Oven sensor malfunction.
The oven is overheating.
Check the Control PBA NTC sensor.
Check the PBA NTC Sensor.
Check the PBA NTC Sensor.
Control pad malfunction.
Door lock malfunction.
PCB signal malfunction.
Touch IC and PCB signal
malfunction.
Oven vent blocked.
44 English
Solution
1. Press OFF/CLEAR, and then
restart the oven.
2. If the problem persists,
disconnect all power to
the oven range for at
least 30 seconds and then
reconnect the power.
1. If oven vent or cover air is
blocked by aluminum foil
or others, remove that and
restart oven.
2. To reset error, disconnect
power or tap 'OFF' after
opening the oven door at
least 60 seconds.
Code symbol
Meaning
Gas leakage in the gas connection
section.
** If these solutions do not solve the problem, contact a local Samsung service
center or call 1-800-SAMSUNG (1-800-726-7864).
Solution
1. Disconnect power. Open the
back cover. Check there are
signs of combustion in the
gas connection section.
2. If there are signs of
combustion, replace GPR
and TCO and check the gas
leakage.
3. If there are no signs of
combustion, check wire-TCO,
Wire main - sub connection
status and PBA S/W version.
Advertisement
Table of Contents
