Download Print this page

Climax Technology TT01 Quick Start Manual

 Explore view :

 LCD

Pressure unit

TT01 Quick Start Guide V0.0.3

Function

USB charging port

ID/Pressure/

Temperature

Display

Battery level

Sensor ID

Table of Contents

Need help?

Do you have a question about the TT01 and is the answer not in the manual?

Page 1 TT01 Quick Start Guide V0.0.3  Explore view : Function USB charging port Power on/off Display  LCD Battery level ID/Pressure/ Temperature Pressure unit Sensor ID...
Page 2 LCD screen is active, and a beep is heard to indicate that Press 3 seconds tool is turned off. If TT01 is idle for 10  minutes, it will automatically shut down. If the battery level is too ...
Page 3 Change the pressure unit Change sequence:  PSI  KPA  BAR Idling Press 3 seconds Press 3 seconds...
Page 4 Interactive display the tire pressure and ID. Click Wake-up is unsuccessful  and tool sends long beep Click the function button again to cancel if TT01 can’t receive any interactive display and change to manual data in 20 seconds. switching.
Page 5 USB charging Port TT01 will start up if Mocro  USB plugs into charging port. In the battery charging mode,  the TT01 will be canceled...
Page 6 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.