How To Operate; Equipment Cleaning - HoMedics ARMH-970-CA Instruction Manual And Warranty Information

HOW TO OPERATE

Power ON
Plug in adapter to wall and diffuser. The diffuser will beep to indicate that the
diffuser is plugged in and ON. If plugged in already, press the
on the diffuser base or remote.
Power OFF
Press to turn off the diffuser.
Intensity Setting
The diffuser has 9 scent levels. On the diffuser base, press
intensity, press
(1-9) level to start.
Remote Control
Remove pull tab from remote control before using.
Timer
Press timer button on diffuser to cycle through the timer options: 1, 2, 4, or 8
hours and off.
On the remote, the user can select the desired timer duration or turn the timer off
by pressing the corresponding button.

EQUIPMENT CLEANING

The diffuser may need to be cleaned when:
1. You're about to change to another SereneScents™ 120 ml oil bottle.
2. The atomization volume becomes weak.
Cleaning steps:
1. Fill a clean bottle with 90% isopropyl alcohol or higher.
2. Install this bottle to the diffuser and turn the diffuser on level 9.
Let it work for 10 minutes.
3. Turn OFF diffuser, remove bottle with isopropyl alcohol and replace with bottle
of fragrance oil.
to decrease the intensity. On the remote press your preferred
4
button located
to increase the